You have already completed the Test before. Hence you can not start it again.
Test is loading...
You must sign in or sign up to start the Test.
You have to finish following quiz, to start this Test:
Your results are here!! for" CompTIA Server+ Practice Test 2 "
0 of 58 questions answered correctly
Your time:
Time has elapsed
Your Final Score is : 0
You have attempted : 0
Number of Correct Questions : 0 and scored 0
Number of Incorrect Questions : 0 and Negative marks 0
Average score
Your score
CompTIA Server+
You have attempted: 0
Number of Correct Questions: 0 and scored 0
Number of Incorrect Questions: 0 and Negative marks 0
You can review your answers by clicking view questions. Important Note : Open Reference Documentation Links in New Tab (Right Click and Open in New Tab).
Answer Review
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
Answer
Review
Unattempted
Correct
Incorrect
Unattempted
Every question in this attempt was answered correctly.
Question 1 of 58
1. Question
An administrator is securing a secure web server by disabling ports. After completing this process, clients cannot access the secure web server. The administrator should now go back and verify whether which of the following ports is enabled?
Correct
Incorrect
Unattempted
Question 2 of 58
2. Question
A server technician is investigating a potential data breach. It is believed that the breach occurred via telnet access. Which of the following could validate this hypothesis?
Correct
Incorrect
Unattempted
Question 3 of 58
3. Question
Users report that an application is unable to connect to a server on the same network segment. Which of the following is the MOST likely reason?
Correct
Incorrect
Unattempted
Question 4 of 58
4. Question
A technician needs to add a processor to a server. Which of the following specifications should the technician examine? (Select THREE).
Correct
Incorrect
Unattempted
Question 5 of 58
5. Question
A server’s runtime during power outages is too short to shut down properly. A system technician is asked to remediate the problem. Which of the following would be the result of adding additional batteries to the UPS?
Correct
Incorrect
Unattempted
Question 6 of 58
6. Question
A system administrator wants to assure that a server is responsive. Which of the following networking tools should the administrator use to verify network connectivity?
Correct
Incorrect
Unattempted
Question 7 of 58
7. Question
Which of the following is the core software application that manages computer virtualization?
Correct
Incorrect
Unattempted
Question 8 of 58
8. Question
Which of the following is a requirement for a server to allow guests to be installed on a hypervisor host?
Correct
Incorrect
Unattempted
Question 9 of 58
9. Question
Swap space or page file is reserved on the:
Correct
Incorrect
Unattempted
Question 10 of 58
10. Question
An administrator needs to deploy 1000 servers in a short period of time. Which of the following deployment methods will expedite the OS installations?
Correct
Incorrect
Unattempted
Question 11 of 58
11. Question
A network administrator is installing additional devices on the network. Currently, the network segment is utilizing all allocated IP addresses. If there are additional addresses available, which of the following would be BEST for the network administrator to perform to accommodate the new network devices?
Correct
Incorrect
Unattempted
Question 12 of 58
12. Question
Which of the following allows virtual machines to share the NIC of the host?
Correct
Incorrect
Unattempted
Question 13 of 58
13. Question
An administrator is asked to change a configuration using a GUI on a Windows server, but does not have access to a KVM. Which of the following is BEST to make the change?
Correct
Incorrect
Unattempted
Question 14 of 58
14. Question
Several of the finance department computers are experiencing timeouts while in their financial program. The program will not open or close; however, the previous day the program was running without issues. Which of the following is MOST likely the cause of this problem?
Correct
Incorrect
Unattempted
Question 15 of 58
15. Question
A system administrator is troubleshooting a network connectivity issue and runs ipconfig/all on the host. The command returns the following:
IPv4 Address: 169.254.0.12 –
Subnet mask: 255.255.0.0 –
The client is configured for DHCP. Which of the following commands should be run on the client to resolve this issue? (Select TWO).
Correct
Incorrect
Unattempted
Question 16 of 58
16. Question
A technician is assigned a task to configure a new server with six hard drives. The senior administrator requested the technician utilize the drives for maximum fault tolerance. Which of the following RAID configurations should the technician use?
Correct
Incorrect
Unattempted
Question 17 of 58
17. Question
A datacenter technician encounters a power receptacle labeled NEMA L5-30. Which of the following powers is this socket rated for?
Correct
Incorrect
Unattempted
Question 18 of 58
18. Question
A technician is experiencing overheating on a rack mounted server. After powering off and removing the cover of the server, a large amount of dust is noticed on one of the fans. After cleaning out the dust and powering the server back on, the server is still overheating. Which of the following would BEST explain this issue?
Correct
Incorrect
Unattempted
Question 19 of 58
19. Question
A technician notices a rack mounted server is beeping without booting up. The NEXT step to diagnose this issue would be to:
Correct
Incorrect
Unattempted
Question 20 of 58
20. Question
A server technician has been tasked with purchasing cables and connectors for a new server room. The server room consists of one switch, two servers, and one
IP telephone. Which of the following types of cables and connectors should the technician purchase?
Correct
Incorrect
Unattempted
Question 21 of 58
21. Question
A technician is tasked with providing network-based high availability to a pair of identical web servers. Which of the following minimum server NIC configurations fulfills these requirements?
Correct
Incorrect
Unattempted
Question 22 of 58
22. Question
A system administrator is concerned with employees connecting removable storage to the server to copy sensitive data. Which of the following solutions addresses this concern?
Correct
Incorrect
Unattempted
Question 23 of 58
23. Question
Which of the following is a reason to have a remote cold site readily available in case of a disaster in the primary datacenter?
Correct
Incorrect
Unattempted
Question 24 of 58
24. Question
A server in a small company functions as a print server. Suddenly it stops sending print jobs to the printers. A technician verifies that the printers are working correctly. Additionally, the print spooler had been restarted and is running on the server, it is accessible from workstations, and it shows as being ready to accept print jobs. Which of the following has MOST likely caused the print server to stop processing print jobs?
Correct
Incorrect
Unattempted
Question 25 of 58
25. Question
A mission critical server has faulted with a dead 66 MHz 3.3V PCI-X network interface card. The system administrator has been directed to get the server functional as soon as possible, even if it is connected with less bandwidth. There are no onsite spare cards available and the vendor does not expect to have the parts for at least a week. Which of the following immediately available NICs could be substituted instead?
Correct
Incorrect
Unattempted
Question 26 of 58
26. Question
Which of the following is the MOST energy efficient way of powering equipment within a datacenter with a large UPS battery bank?
Correct
Incorrect
Unattempted
Question 27 of 58
27. Question
A server is giving a fault code indicating that a RAM chip is producing errors and should be replaced. According to best practices, which of the following is the proper sequence of steps to replace the faulty module?
Correct
Incorrect
Unattempted
Question 28 of 58
28. Question
Which of the following protocols is used primarily for monitoring and managing network devices?
Correct
Incorrect
Unattempted
Question 29 of 58
29. Question
A number of users are indicating that access to a network file server is responding very slowly when reading or writing to the share. The server administrator notes that a drive has failed in a four-disk RAID 5 array. The array is running in a degraded state because no hot spare was configured. After replacing the failed disk, which of the following steps would be BEST to take to prevent slow response after a drive failure?
Correct
Correct
Option B. Add an additional hard drive, and convert the volume to a RAID 6 configuration
Correct because:
RAID 6 provides dual parity, meaning the array can tolerate two simultaneous drive failures.
In RAID 5, when one disk fails, the array runs in a degraded state, causing slow performance because parity must be recalculated on the fly.
RAID 6 reduces this risk by offering better fault tolerance, ensuring that performance remains more stable even after a single drive failure.
This makes RAID 6 the best option to prevent slow response in the future.
Incorrect
Option A. Add a drive to the array, but do not configure it as a hot spare
Incorrect because simply adding a drive without configuring it as a hot spare does not improve fault tolerance.
The system would still run in degraded mode until manual intervention occurs.
Option C. Add an additional hard drive, and convert the volume to a RAID 10 configuration
Incorrect because RAID 10 requires at least four drives and works by mirroring and striping.
While RAID 10 offers performance and redundancy, converting from RAID 5 to RAID 10 is not straightforward and would require a complete rebuild, not just adding one drive.
Option D. Add a drive to the array, and configure it as a cold spare
Incorrect because a cold spare is not automatically used when a drive fails.
The administrator would still need to manually replace or activate the spare, which does not prevent degraded performance during failure.
Incorrect
Correct
Option B. Add an additional hard drive, and convert the volume to a RAID 6 configuration
Correct because:
RAID 6 provides dual parity, meaning the array can tolerate two simultaneous drive failures.
In RAID 5, when one disk fails, the array runs in a degraded state, causing slow performance because parity must be recalculated on the fly.
RAID 6 reduces this risk by offering better fault tolerance, ensuring that performance remains more stable even after a single drive failure.
This makes RAID 6 the best option to prevent slow response in the future.
Incorrect
Option A. Add a drive to the array, but do not configure it as a hot spare
Incorrect because simply adding a drive without configuring it as a hot spare does not improve fault tolerance.
The system would still run in degraded mode until manual intervention occurs.
Option C. Add an additional hard drive, and convert the volume to a RAID 10 configuration
Incorrect because RAID 10 requires at least four drives and works by mirroring and striping.
While RAID 10 offers performance and redundancy, converting from RAID 5 to RAID 10 is not straightforward and would require a complete rebuild, not just adding one drive.
Option D. Add a drive to the array, and configure it as a cold spare
Incorrect because a cold spare is not automatically used when a drive fails.
The administrator would still need to manually replace or activate the spare, which does not prevent degraded performance during failure.
Unattempted
Correct
Option B. Add an additional hard drive, and convert the volume to a RAID 6 configuration
Correct because:
RAID 6 provides dual parity, meaning the array can tolerate two simultaneous drive failures.
In RAID 5, when one disk fails, the array runs in a degraded state, causing slow performance because parity must be recalculated on the fly.
RAID 6 reduces this risk by offering better fault tolerance, ensuring that performance remains more stable even after a single drive failure.
This makes RAID 6 the best option to prevent slow response in the future.
Incorrect
Option A. Add a drive to the array, but do not configure it as a hot spare
Incorrect because simply adding a drive without configuring it as a hot spare does not improve fault tolerance.
The system would still run in degraded mode until manual intervention occurs.
Option C. Add an additional hard drive, and convert the volume to a RAID 10 configuration
Incorrect because RAID 10 requires at least four drives and works by mirroring and striping.
While RAID 10 offers performance and redundancy, converting from RAID 5 to RAID 10 is not straightforward and would require a complete rebuild, not just adding one drive.
Option D. Add a drive to the array, and configure it as a cold spare
Incorrect because a cold spare is not automatically used when a drive fails.
The administrator would still need to manually replace or activate the spare, which does not prevent degraded performance during failure.
Question 30 of 58
30. Question
A server has been assigned a role of mail server. Which of the following services will be installed as a result of this selection?
Correct
Incorrect
Unattempted
Question 31 of 58
31. Question
Which of the following server types stores the list of network usernames and passwords required for authentication?
Correct
Incorrect
Unattempted
Question 32 of 58
32. Question
A company is being audited by its operating system vendor. The company needs to report the number of operating systems in use, the versions of the operating systems, and the product keys. Which of the following will be MOST helpful in passing the audit?
Correct
Incorrect
Unattempted
Question 33 of 58
33. Question
Which of the following is the MOST secure to erase data before disposal of server hard drives?
Correct
Incorrect
Unattempted
Question 34 of 58
34. Question
Users in the accounting department report that they are unable to access a shared network drive used by all departments. Upon troubleshooting, a technician determines that three users in the marketing department, two in sales, five in human resources, and ten in IT are all successfully accessing the shared network drive. Which of the following is MOST likely causing the issue?
Correct
Incorrect
Unattempted
Question 35 of 58
35. Question
A network administrator is tasked to set up zoning for a SAN infrastructure that requires redundancy. Which of the following types of hardware should the administrator implement?
Correct
Incorrect
Unattempted
Question 36 of 58
36. Question
The logs on a server in a datacenter indicate that the server unexpectedly shut down minutes after the night cleaning crew started their shift. Which of the following is the MOST likely reason for the shut down?
Correct
Incorrect
Unattempted
Question 37 of 58
37. Question
A technician reads a hardware manufacturer’s blog indicating a critical firmware update is available for the company’s file server. Which of the following is the
BEST course of action?
Correct
Incorrect
Unattempted
Question 38 of 58
38. Question
A system administrator is tasked to set up a file server. The file server must be able to support access control lists and logging for auditing purposes. To meet these requirements, with which of the following file system types should the administrator format the file system?
Correct
Incorrect
Unattempted
Question 39 of 58
39. Question
A user reports that a script \\Server\Share\Runme.bat, which is run on a daily basis, cannot be accessed. Which of the following is the FIRST step to take in resolving this issue?
Correct
Incorrect
Unattempted
Question 40 of 58
40. Question
After a migration to a new server, users report that they are unable to save files to their home directories. A check of the permissions on the home directories indicate that the permissions are set as follows:
User: r-x –
Group: r–
Other: r-x –
A server administrator verifies the correct user and group ownership of the home directories. Which of the following will MOST likely resolve the issue?
Correct
Incorrect
Unattempted
Question 41 of 58
41. Question
Which of the following is the MOST complex way to directly reduce heat for computing components?
Correct
Incorrect
Unattempted
Question 42 of 58
42. Question
A datacenter is in a geologically active area and has no earthquake abatement installed. Which of the following drive types is BEST for general server use?
Correct
Incorrect
Unattempted
Question 43 of 58
43. Question
A user is unable to save a new presentation to the network U:\ drive. The error message indicates that there is no available space. Other users in the department are not experiencing any problems saving to the U:\ drive. Which of the following is the MOST likely cause of this issue?
Correct
Incorrect
Unattempted
Question 44 of 58
44. Question
A technician is configuring switches with SFP ports on multiple floors in a building. A switch on the first floor must be connected to a switch on the second floor for trunking VLAN traffic. Which of the following would be the MOST appropriate cable type for the technician to use?
Correct
Incorrect
Unattempted
Question 45 of 58
45. Question
A system administrator is tasked to setup a database server with failover clustering feature enabled. One of the requirements is to have one database running at all times with data being synchronized and replicated to the idle database in case the primary database server fails. Both servers will be monitored by a witness on a LUN. Which of the following cluster techniques should be implemented to meet these requirements?
Correct
Incorrect
Unattempted
Question 46 of 58
46. Question
A server technician is tasked to replace a RAID controller battery on a server. The server technician has no prior experience replacing a RAID controller battery.
Which of the following should the server technician do to obtain the required knowledge or procedures to replace the battery?
Correct
Incorrect
Unattempted
Question 47 of 58
47. Question
In a Windows environment, a user is able to access the network folder and open items, but is not able to delete anything. Which of the following folder permissions does the user require?
Correct
Incorrect
Unattempted
Question 48 of 58
48. Question
A system technician is tasked with destroying several hard drives that contain PII. Which of the following would be the BEST method for disposing of the drives?
Correct
Incorrect
Unattempted
Question 49 of 58
49. Question
A technician needs to install six blade servers. Which of the following MUST a technician install along with the blades?
Correct
Incorrect
Unattempted
Question 50 of 58
50. Question
A server repeatedly crashes with a BSOD when running an application that uses a high amount of system resources. Which of the following hardware components MOST likely needs to be checked by a technician?
Correct
Correct
Option A. Memory
Correct because:
Applications that consume large amounts of system resources rely heavily on RAM.
Faulty or insufficient memory can cause instability, leading to Blue Screen of Death (BSOD) errors.
Memory issues such as bad modules, incorrect configurations, or overheating are common causes of repeated crashes under heavy load.
Therefore, checking the server’s memory is the most likely step a technician should take.
Incorrect
Option B. Hard drive
Incorrect because hard drive failures typically cause read/write errors, slow performance, or boot issues, not BSODs triggered by high resource usage.
While a failing drive can cause system instability, it is less likely to be the direct cause in this scenario.
Option C. RAID controller
Incorrect because RAID controller issues usually manifest as storage access problems or degraded arrays.
They do not typically cause BSODs during high resource usage of applications.
Option D. CPU
Incorrect because while the CPU is heavily used by resource-intensive applications, CPU failures usually result in system hangs or overheating shutdowns, not repeated BSODs.
Memory errors are far more common in this type of crash scenario.
Incorrect
Correct
Option A. Memory
Correct because:
Applications that consume large amounts of system resources rely heavily on RAM.
Faulty or insufficient memory can cause instability, leading to Blue Screen of Death (BSOD) errors.
Memory issues such as bad modules, incorrect configurations, or overheating are common causes of repeated crashes under heavy load.
Therefore, checking the server’s memory is the most likely step a technician should take.
Incorrect
Option B. Hard drive
Incorrect because hard drive failures typically cause read/write errors, slow performance, or boot issues, not BSODs triggered by high resource usage.
While a failing drive can cause system instability, it is less likely to be the direct cause in this scenario.
Option C. RAID controller
Incorrect because RAID controller issues usually manifest as storage access problems or degraded arrays.
They do not typically cause BSODs during high resource usage of applications.
Option D. CPU
Incorrect because while the CPU is heavily used by resource-intensive applications, CPU failures usually result in system hangs or overheating shutdowns, not repeated BSODs.
Memory errors are far more common in this type of crash scenario.
Unattempted
Correct
Option A. Memory
Correct because:
Applications that consume large amounts of system resources rely heavily on RAM.
Faulty or insufficient memory can cause instability, leading to Blue Screen of Death (BSOD) errors.
Memory issues such as bad modules, incorrect configurations, or overheating are common causes of repeated crashes under heavy load.
Therefore, checking the server’s memory is the most likely step a technician should take.
Incorrect
Option B. Hard drive
Incorrect because hard drive failures typically cause read/write errors, slow performance, or boot issues, not BSODs triggered by high resource usage.
While a failing drive can cause system instability, it is less likely to be the direct cause in this scenario.
Option C. RAID controller
Incorrect because RAID controller issues usually manifest as storage access problems or degraded arrays.
They do not typically cause BSODs during high resource usage of applications.
Option D. CPU
Incorrect because while the CPU is heavily used by resource-intensive applications, CPU failures usually result in system hangs or overheating shutdowns, not repeated BSODs.
Memory errors are far more common in this type of crash scenario.
Question 51 of 58
51. Question
A technician troubleshooting a mail server determines that the server is low on available hard drive space and needs an additional hard drive installed. The server will need to be offline for the hardware installation. Which of the following troubleshooting steps should the technician do NEXT?
Correct
Incorrect
Unattempted
Question 52 of 58
52. Question
In a PKI, which of the following represents the top level of a certificate authority?
Correct
Incorrect
Unattempted
Question 53 of 58
53. Question
A server has a faulty hard drive, and the administrator needs to replace the hard drive while it is running. The server needs to support which of the following drives?
Correct
Incorrect
Unattempted
Question 54 of 58
54. Question
After successfully authenticating to a remote server, a server administrator is presented with an interactive command line with no graphical interface. Which of the following protocols did the administrator MOST likely use to securely connect to the remote server?
Correct
Incorrect
Unattempted
Question 55 of 58
55. Question
A company has 700 servers installed in 50 server racks in the datacenter. The Chief Technology Officer issued a memorandum to the IT department with a directive to reduce power and cooling consumptions by 50% in the datacenters. Which of the following should the system administrators recommend?
Correct
Incorrect
Unattempted
Question 56 of 58
56. Question
Which of the following protocols can be used to query for host, user, and group information for clients?
Correct
Incorrect
Unattempted
Question 57 of 58
57. Question
A technician is backing up 10 GB of data on a file server to a 250 GB external USB hard drive. After 4 GB has been backed up, the software generates an error that the size of the backup exceeds the file limit. Which of the following file system types is being used?
Correct
Incorrect
Unattempted
Question 58 of 58
58. Question
An administrator decides to implement access control techniques to secure a datacenter. Which of the following would be the STRONGEST technique for the administrator to use?
Correct
Incorrect
Unattempted
X
Use Page numbers below to navigate to other practice tests